Nikon Zf Accessories

Battery

The Zf uses newer versions of the EN-EL15, currently the EN-EL15C. The EN-EL15C version has a higher capacity (2280mAh versus 1900mAh of previous versions). 

 You can use earlier versions of the EN-EL15 with the Zf:

  • EN-EL15 — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15A — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15B — powers the camera, can be charged via USB in the camera, does support continuous USB power 
  • EN-EL15C — powers the camera, can be charged via USB in the camera, does support continuous USB power 

Other cameras that use this battery: Z5, Z5II, Z5IIC, Z6, Z6II, Z6III, Z7, Z7II, Z8, and ZR.

A note about continuously powering the Zf with a EN-EL15C battery and the camera hooked up to USB: Nikon is using the PD (Power Delivery) standard. That means that any USB C charger that meets the standard can power the camera; you don't need Nikon's own charger. However, you do need to be aware that there are USB-C cables out there that don't support this standard. Be very careful to make sure you're using a PD-complaint charger and a PD-compliant cable. Note that you wish to use USB charging the USB Power Delivery source needs to be 27 watts minimum (9 volts at 3 amps).

Quite a few dedicated chargers exist for the EN-EL15 batteries (and should charge all versions of the battery). I like the dual battery chargers that have level displays.

Cages, Plates

As I write this, two bottom plates exist for the Zf:

  • Fotodiox DLX. An Arca-Swiss dovetail plate with an extended grip on the right front.
  • Nikon’s own ZF-GR1. This is an extended grip that is available now available from NikonUSA. You can also find them on eBay. 
  • Smallrig’s 4262 grip. This is an Arca-Swiss dovetail plate with an extended grip on the right front. 
  • Neewer CA063L. Another Arca-Swiss dovetail plate with an extended grip on the right front.
  • Newer CA079. An updated version of the previous one that adds a rear thumb rest and body protection.
  • SmallRig 4261. A full cage for the Nikon Zf camera.

Viewfinder


Cards

Buy UHS-II capable SD cards of at least 300MBps speed. Make sure they say U3 for video capability.
Approved CardsSizes
SanDisk16GB and 32GB (SDHC), 64GB, 128GB, 256GB, and 512GB (SDXC)
Sony32GB (SDHC), 64GB and 128GB (SDXC)
Lexar Professional16GB and 32GB (SDHC), 64GB, 128GB, 256GB, and 512GB (SDXC)
Buy UHS-I capable microSD cards of at least 30MBs speed. Make sure they say U3 for video capability. Only SanDisk and Lexar have been approved.

Remotes

The Zf doesn't have a dedicated remote connection. Nikon has made a wireless Bluetooth remote control for the camera:

  • ML-L7 wireless remote — A remote with additional programmable functions and controls. The Coolpix P1000 can also use this remote.
  • AODELAN ML-L7A Wireless shutter — a third-party clone of the Nikon ML-L7 remote.
  • JJC BTR-N1 Wireless Remote Control — another third-party clone of the Nikon ML-L7, though in a different style. JJC also makes a TP-N1 Shooting Grip (selfie stick) that comes with the wireless remote.
  • SmallRig Tripod Grip for ML-L7 — not actually a remote, but a place to put your remote in a small handgrip/tripod combination that works for selfie/video type work.

Other Nikon cameras using these Bluetooth remotes: Coolpix P950, Coolpix P1000, Coolpix A1000, Coolpix B600, Z30, Z50, Z50II, Z5, Z5II, Z5IIC, Z6II, Z6III, and Z7II.

Other

Vertical grips: 
  • Not supported
Looking for other photographic information? Check out our other Web sites:
photography: bythom.com | Nikon DSLRs: dslrbodies.com | Nikon film SLRs: filmbodies.com
Mission statement | Code of Ethics | Privacy Info | Sitemap

text and images © 2026 Thom Hogan — All Rights Reserved