The Nikon Z System cameras use one of three battery types:
- EN-EL25 (left, below) — Z30, Z50, Z50II, Zfc
- EN-EL15 (middle, below) — Z5, Z5II, Z5IIC, Z6, Z6II, Z6III, Z7, Z7II, Z8, Zf, ZR
- EN-EL18 (right, below) — Z9 (Note that the EN-EL18 batteries need a “door” to be used in the camera. One door is supplied with each camera.)
In camera charging is done via USB Power Delivery (PD). Things to know about USB PD:
- Most recent cameras look for 27 watts minimum (9 volts at 3 amps).
- Older cameras look for 15 watts minimum (5 volts at 3 amps).
- Batteries do not charge in the camera while the camera is turned on and active.
- An orange LED will light if the camera is charging a battery. If that light is flashing, there’s been a malfunction in the charging cycle; try another battery.
- A Z8 has a dedicated USB PD connector (bottom USB-C connector). Batteries only charge if power is supplied to that port.
Third party versions of all three Nikon batteries are available. Some work well with the Z System cameras, a few don’t work on some cameras or some firmware updates.
Nikon does not supply a charger with their cameras any more (they do supply a USB-C cable that can be used with a charger). You will need to get a USB PD capable charger, but note the power specifics in the bulleted list, above.