Nikon Z6 Accessories

Battery

The Z6 uses newer versions of the EN-EL15, currently the EN-EL15C. The EN-EL15C version has a higher capacity (2280mAh versus 1900mAh of previous versions). 

 You can use earlier versions of the EN-EL15 with the Z6:

  • EN-EL15 — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15A — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15B — powers the camera, can be charged via USB in the camera, does support continuous USB power 
  • EN-EL15C — powers the camera, can be charged via USB in the camera, does support continuous USB power 

Other cameras that use this battery: Z5, Z5II, Z5IIC, Z6II, Z6III, Z7, Z7II, Z8, Zf, and ZR.

A note about continuously powering the Z6 with a EN-EL15C battery and the camera hooked up to USB: Nikon is using the PD (Power Delivery) standard. That means that any USB C charger that meets the standard can power the camera; you don't need Nikon's own charger. However, you do need to be aware that there are USB-C cables out there that don't support this standard. Be very careful to make sure you're using a PD-complaint charger and a PD-compliant cable. Note that you wish to use USB charging the USB Power Delivery source needs to be 15 watts minimum (5 volts at 3 amps).

Quite a few dedicated chargers exist for the EN-EL15 batteries (and should charge all versions of the battery). I like the dual battery chargers that have level displays.

Cages, Plates

Nikon introduced a Z-GR1 extension grip/plate and Z-VP1 bracket for the Z FX cameras (adds Arca-Swiss compatible plates):

bythom zgr1
bythom zvp1

Unfortunately, the Nikon bracket is only available in Japan at the moment. So you're left looking for a different bracket in the rest of the world.

The following other brackets and plates are available:

  • Fugasun L plate
  • Gabale QR Arca-style L-plate for camera
  • Honglai HL-Z6/Z7L Arca-style L-plate for camera; also features hand grip extension plus an extra cold shoe option.
  • Kirk Photo:
    • PZ-178 Arca-style camera plate
    • BL-Z Arca-style L-plate for camera
    • PZ-130 Arca-style plate for FTZ adapter
    • BL-FTZV2 Arca-style L-bracket for the FTZ adapter
    • LIM NK-Z71BK Leather half-case with Arca plate
  • Markins:
    • PN-Z7 Arca-style camera plate
    • LN-Z7 Arca-style add-on L side plate for PN-Z7
  • Meike MK-Z7G Slim Arca-style plate with grip extension — This grip/plate seems to have been redesigned a bit over time. It features an extension of the hand grip coupled with a full Arca-Style plate for the remainder of the camera bottom. The battery is accessed by moving the battery door from the camera to the bottom of the added grip
  • Really Right Stuff
    • BZ7 Arca-style base plate
    • BZ7-L Arca-style L-plate for camera
  • Smallrig
    • APL2258 Arca-style L-plate (optional cable clamps) (What I'm using)
    • APL2244 Camera cage
  • STC Fogrip Unique folding grip extension with Arca-style L plate across camera bottom
  • Sunwayfoto PNL-Z6 Arca-style L-plate
  • Three Legged Thing Zelda Arca-style L-plate (available in copper or grey
  • 8Sinn makes both a basic cage and a cage with top handle for the Z5, Z6, and Z7 cameras.
  • Yelangu. C15 full cage with top handle and Arca-Swiss base plate for the Z5, Z6, and Z7 cameras. 
  • Tilta. A full cage for Nikon Z5, Z6, and Z7 cameras. Tilta makes both the simple cage, as well as accessories that mount to it, most notably a quick-release top handle and a side power handle. 
  • SmallRig 2882. A full cage for the Nikon Z5, Z6, and Z7 cameras when mounted with the MB-N10 Battery Grip.

Viewfinder

Z6 Viewfinder Eye Cup:

  • The Nikon original is DK-29 
  • Kiwifotos DK-29 Long Soft replacement extends out further than Nikon's, and uses a soft silicone
  • Hoodman HEYENZ HoodEye replacement is an oversize cup
  • Amazon has a wide selection of replacements
  • Zemlin Photo makes replacement eyecups with circular cups

Note that any Eye Cup you use needs to have the notch at the top for the eye detection mechanism to work. There are many older Eye Cups that will fit on the Nikon slip-on edges that do not feature that notch.

Cards

Note that these specifications relate to firmware C3.00 and later.
Approved XQD CardsSeriesSize
Nikon 
64GB, 128GB
SonyG32GB, 64GB, 120GB, 128GB, 240GB, 256GB
SonyM32GB, 64GB, 128GB
SonyN32GB, 64GB
SonyS32GB, 64GB
SonyH16GB, 32GB
LexarProfessional 1100x32GB, 64GB
LexarProfessional 1333x32GB, 64GB
LexarProfessional 1400x32GB, 64GB
LexarProfessional 2933x32GB, 64GB, 128GB
Approved CFexpress CardsSeriesSize
SonyCEB-G128GB, 256GB, 512GB
LexarProfessional128GB, 256GB
ProGradeCobalt325GB, 650GB
ProGradeGOLD120GB, 128GB, 256GB, 512GB, 1TB
SanDiskExtreme Pro64GB, 128GB, 256GB, 512GB
Nikon
660GB

Remotes

The Z6 features Nikon's standard 10-pin rectangular remote connection, which is used for both wired and wireless remotes:

  • MC-DC2 wired remote — A simple wired remote. Lower cost versions of this solution exist, such as the Vello RS-N2II. Wireless versions are also available.
  • WR-R10 wireless transmitter (replaced by the WR-R11b) — Nikon's wireless remote system can trigger remote flashes, or be used with the WR-T10 to fire the camera remotely.
  • Foologrpahy Unleased N2 — A smartphone-controlled wireless trigger that plugs in the 10-pin connector on these cameras. Integrates with geotagging, and supports interval and long time shooting.

Other Nikon cameras using this connector: D90, D3100 and later, D5xxx, D7xxx, D6xx, D7xx, Df, Coolpix P7700, P7800, A, P1000, Z5, Z6II, Z6III, Z7, and Z7II.

Other

Underwater housings:
Vertical grips: 
  • MB-N10 was the original, flawed grip
  • MB-N11 was the fixed grip
  • MB-N14 is the newest grip that works
Looking for other photographic information? Check out our other Web sites:
photography: bythom.com | Nikon DSLRs: dslrbodies.com | Nikon film SLRs: filmbodies.com
Mission statement | Code of Ethics | Privacy Info | Sitemap

text and images © 2026 Thom Hogan — All Rights Reserved